How To

How to Fix Gaps in Your Hardwood Floors?

No Comments

Hardwood floors are very much adorned for their natural beauty and real wood appeal. People love to install this incredible flooring in their houses. These floors are one of the most traditional forms of flooring. With a lot of feasible features and a host of advantages, this flooring bothers a bit. After a considerable time of use, most people noticed a gap in floors that actually creates a lot of problems.

Even the most carefully installed floors can begin to gap over time. Gaps can not only detract from the look of floors, but they can also collect dirt and make a home draughty. Small gaps are fine, but if the space is large enough to slip the end of nickel into it, it has to be repaired.

We are here to give you the perfect solution for How to fix gaps in your hardwood floors. But before you move to know the solution, here are the reasons how these gaps are formed in your floors.

How Gaps Are Formed Hardwood Floors?

Wood floors have a proclivity to shrink with time. Particularly in older homes, the shrinking generates holes in the flooring. In severely hot or dry climates, this is also prevalent. The floors get narrower and begin to gap as moisture is pulled out of them.

This may be reduced with proper installation, but it cannot be totally prevented. You can, however, try your best to get rid of it. Check it out how?

How Gaps Are Formed Hardwood Floors

Initial Sanding

An initial sanding is essential whenever wood floors are refinished. If your floors are extensively scratched, a drum-style sander is a way to go. These machines are simple to use and function by removing scratches from the top layer of finish, smoothing the floor, and cutting through the top layer of finish.

You can go for using an orbital sander, which is a wonderful alternative if there isn’t much damage to the flooring. This tool sands the floor softly, smoothing it out without removing too much wood or creating thinning. Let’s look at the methods to Fix gaps in your wooden flooring Dubai!

Methods to Fix Gaps in Hardwood

When gaps in hardwood appear, the first consideration is whether or not to repair them. Warm temperature causes natural wood to expand, while cold weather causes it to contract. In the winter, minor gaps should not be fixed unless they are serious. Wait until the summer to see if the gaps are still there.

If the gaps are in the same condition then you must consider repairing them. There are several ways to eliminate these gaps. We are listing below a few of them along with the supplies you need to complete the whole process, have a look!

Patching with Wood Putty

  • Wood Putty
  • Putty Knife
  • Sander
  • Stain

Wood putty is an excellent choice for tiny cracks. It is one of the effective methods that is being used. Using a standard putty knife, it’ll be easy to work into gaps. Allow the putty to completely dry before proceeding to sanding and finishing. Because the putty lacks a wood grain, expect a minor difference in finish between the wood and the putty after the fill-up.

Using a Rope Filler

  • Wood Glue
  • Jute Rope
  • Putty Knife
  • Stain

So start it by applying wood glue to the inside of the gaps in the hardwood. Using a putty knife, work a length of jute rope into the wood gap. Continue doing it until the jute rope has completely filled the gap. Try to pack it tightly as possible.

Although using jute rope instead of wood putty gives a more natural appearance. The rope does have a propensity to loosen with time, it can be a greater alternative. When this happens, push the rope back into place with the putty knife and add a bit more wood glue.

Fixing With Wood Strip Filler in Your Hardwood Floors

Fixing With Wood Strip Filler

  • Table Saw
  • Spare Floorboard
  • Sander
  • Rubber Mallet
  • Stain

Rip strips of wood from a scrap piece of flooring with a table saw. After that consider taking precise measurements of the length and breadth of the gap to be filled. make sure to achieve a snug fit.

Work the wood strip into the gap with a rubber mallet & consider sealing it in place with wood glue. Cutting thin strips can be difficult and hazardous if done incorrectly, therefore this procedure should only be attempted by someone who is familiar with a table saw.

Consider Before You Start!

Keep a few spare wood boards on hand when laying hardwood flooring in a room in case you need to make repairs later. Wood flooring may be difficult to match, especially after many years as the color will fade. Having additional supplies on hand for the first installation will save you time and aggravation afterward.

Must To Do Task: Sanding & Refinishing

No matter whatever method you use to repair the floor, you’ll need to complete a few finishing tasks to bring it back to its former glory. In order to start with the start by sanding the patch area or areas to ensure that they perfectly blend with the surrounding floorboards. Allow the wood floors to dry completely before going on to the next stage.

Now vacuum & wipe the extra dust & Debris from the floor. Now stain the required region or the overall floor after the floor is dried up. The staining should be up to the severity of the repair you have done. Wood putty, strip, or rope are used to fill the gaps. Wood material or floor is stained with some sturdy spills, so you need to reapply the stain as needed until the entire floor is stained.

In The End!

Repairing gaps in floors is a simple task that can be accomplished with a few common tools and supplies. Fixing gaps in hardwood floors, giving the area a fresh polish, and falling back in love with this traditional flooring. You can follow these simple and easy methods to make your flooring look new again and last for more years to come!

Related Articles

How To Keep Dogs From Peeing On Rugs

How To Keep Dogs From Peeing On Rugs?

Get Folds Out Of Rugs

How To Get Folds Out Of Rugs?

Clean Cowhide Rugs

How Do You Clean Cowhide Rugs?

Prevent Sun Damage on Your Hardwood Floor

How to Prevent Sun Damage on Your Hardwood Floor?